Articles in this category Fiat, Peugeot, Citroen EASYFIT Demountable Floor brackets. GAS IT Technical Documentation. If your fitting a EASYFIT GAS IT tank with factory mounted feet on them, then these feet have to be at the top at all times as t GAS IT Tank extension kit on Sprinter and Crafter vehicles with 919mm outside cross members GAS IT Part Number for this extension kit - GI-TF-077-KIT LED and Contents Gauge Wiring. The GAS IT 9 LED content gauges and tank sender unit works by sending a resistive signal from the float indicator in the tank (where the 0-95 ohm sender is installed), upto the LED indicator in the ve... 3rd universal tank frame Strap. GAS IT Technical Documentation How to assemble a GAS IT Tank & Tank frame. GAS IT Technical Documentation Where do my Fill pipe and pig tail go on the GAS IT underslung gas tanks? If your not sure which end to measure from or where to run your fillpoint hose to on a GAS IT vapour tank or which end to measure from the gas outlet tap, then the pictures below should give you a cle... VW T5 & T6 non 4 Motion 15 ltr GAS IT tank fitting instructions Please see the attached document for where to fit the GAS IT 15 ltr manual or electronic outlet tank system to a VW T5 or T6 van. This tank might fit elsewhere or you might have other items fitted whe... ULCD 2.0 ( GI-ELE-063 ) Wiring (Version 2) Find attached the wiring instructions for the GAS IT ULCD 2.0 unit when using a simple rocker type switch ( GAS IT part number ULCD ( GI-ELE-008 ) Wiring (Version 1 ) THIS INFORMATION IS FOR THE FIRST GENERATION ULCD AND NOT THE 2.0 2021 VERSION. PLEASE SEARCH FOR ULCD 2.) FOR THAT INFORMATION AND WIRING. Find a Original ULCD in black box wiring instructions. Original ULCD in black box wiring instructions - see attached.