Truma Monocontrol CS for 10mm c/w elbow - With crash control sensor DATED 2018
Truma Part number 52411-64 ( vertical model )
Connections - Pigtail on inlet and 10mm connection outlet to copper / steel pipe of vehicle
Safety gas pressure control system for the operation of one-cylinder systems in caravans and motor caravans while driving due to its automatic shut off of the gas system in an accident.
The control system is approved throughout Europe and complies with the EN 13786 standard.
Outlet pressure 30 mbar
Gas pressure regulator with crash sensor for single cylinder operation ( we sell Auto Changeovers for more than one bottle or tank fitment )
Safety gas pressure control system for the operation of one-cylinder systems in caravans and motor caravans while driving.
The integrated crash sensor of the Monocontrol CS enables safe heating even while driving. It prevents gas from escaping after an accident because the gas valve of the cylinder was open.
Vertical mounting possible
Simple reset of the crash sensor
Picture: Installation situation schematic for reference only - shows parts not supplied with the regulator.
If the crash sensor is triggered, you can reset it yourself and the pressure regulator station is quickly ready for use again.
All you have to do on the Monocontrol CS is press the green reset button vigorously for about five seconds.
The controller capacity is 1.5 kg/h and is therefore designed for maximum consumption. On a new install and vehicle build please note the regulator is mounted higher than the gas bottle - the high-pressure pigtail hose to the cylinder valve. (see picture)
Designed to work with 10mm copper. Can be converted to 8mm with the purchase of a reducer GI-ACCS-219
Vertical mounting possible
Simple reset of the crash sensor
Integrated test connection
Use permitted throughout Europe
If the vehicle heating is approved for use wheilst driving there is a integrated mechanical crash sensor, which blocks the gas passage in the event of an accident with a delay of 3.5 g ± 0.5 g acting directly on the release element; this corresponds to an impact speed of approx. 15 to 20 km/h on a solid obstacle with an average vehicle weight Europe-wide use through the use of country-specific high-pressure hose lines (not included)
Test device for leak testing of the liquid gas installation without dismantling the pressure regulating device
