GasIT GasIT Products Technical Support Portal Knowledgebase Product Technical.
LPG Fill Hose
Suggested knowledgebase articles:

Knowledgebase Product Technical. LPG Fill Hose

Articles in this category

How to Assemble the GI-AUX-030 fitting on 3/4UNF/SAE bottle or tank elbows and 3/4 UNF/SAE fillpoints

When assembling the GAS IT lightweight fill hoses using the GAS IT GI-AUX-030 ( fixed ) brass 3/4 UNF/SAE fitting, you simply attach the the brass fitting to the elbow or fillpoint first before fixing...
GAS IT Plug n Fill Picture instructions

GAS IT has released its unique 'Plug n Fill' system for the fill point end and also the bottle / tank fill valve end when using our brilliant LPG lightweight fill hose. Attached to download are the in...
How to assemble GAS IT R67 approved Lightweight Thermoplastic LPG hose and fittings.

Please download the attached assembly information sheet for assembly of the GAS IT thermoplastic lightweight fill hose.  
Removing a fill hose and the excess flow vale in every GAS IT bottle or tank.

All GAS IT bottles and tanks have an automatic excess flow valve fitting in the 80% shut off fill valve so should there be a sudden drop in pressure in the fill hose or fill point due to a cut or burs...
How close can i run the fill hose to a exhaust or heat source?

Certified LPG R67 approved fill hoses are made of various materials.  These include copper pipe covered in plastic, you can have the traditional rubber SAE fill hoses ( which lo
The service life span on GAS IT Rubber or Light weight fill hoses.

The Service life is 10 years after date of installation, however we always recommend that all hoses on a gas system should be checked on a regular bases.