What parts do I need to buy to make up a GAS IT None Feeted Tank System.

If your looking to buy a GAS IT none feeted gas tank system then this 'How to' guide will give you an indication of what options you need to buy to make your system a useable one.

As we have put on the downloadable document itself, this list it's not a full list of all options available as there are so many options that are personal to yourself and the market you are using them in, but it give you an good general indication .

So to clarify, our list will show you that you need to to buy at least :-

1. A fillpoint system.
2. A fill hose length.
3. European adaptors if you're traveling abroad.
4. The gas tank itself
5. The Gas tanks mounting frame.  If your using the mounting frame upside down and the tank hangs in the straps, then it is a regulation need to have at least 3 straps or bands holding the gas tank in place, so use a GAS IT universal strap kit
6. If you want to see the gas level inside the vehicle or somewhere convenient we sell a 12 volt 9 LED contents gauge that sends the gas level from the tank to the LED guage itself.
7. The means of getting the gas out of our bottles via a pigtail or adaptor(s) to convert our gas tank out tap to UK POL, 8mm or 10mm compression 
8. Gas filter, used to stop any dirt in the gas from entering your system. These are fitted on the gas tanks 21.8LH outlet tap.   We also sell models of this filter for use on exchange type gas bottles as well

Head over to the GAS IT Youtube channel where we show and talk you through what options you have and what items are needed when buying a GAS IT tank system.  click here https://www.youtube.com/@GASITTRADECENTRE